Long Range Proximity Sensor - 12 mm Diameter, Shielded, Normally Closed - NPN Controls It features an NPN output

It features an NPN output

The SV-40 Male connector is used when you want to connect an individual sensor to the DSI-2 front panel

Here are the detailed specs for this proximity sensor:

27 x 27 x 1 mm Response frequency (time) 700 Hz (1

This split core current switch utilizes a potentiometer to easily adjust the setpoint (the current at which the switch will turn “On”)

Long Range Proximity Sensor - 12 mm Diameter, Shielded, Normally Closed - NPN Controls It features an NPN outputThis extra long range 12 mm diameter shielded proximity sensor is Normally Closed, which makes it useful to detect holes. It has a 9mm sensing range, and is one of the most useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M12 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. As a Normally